Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Network Setup Parameters: Configuring RAS Settings
5-12
5. Configure Remote RMX-3200 to make 5 connection attempts to the RAS server
before failing:
config ras retry 5
6. Configure how long Remote RMX-3200 waits for a response from the RAS server
before falling back on local authentication:
config ras timeout 30
7. (optional) Verify that the remote authentication settings have been configured
properly:
show ras
The command response similar to the following displays:
8. Save the configuration.
(Dub)>show ras
Shell RAS option: TACACS+ with Local Fallback
RAS Accounting: enabled
RAS Authorization: privilege
RAS Retry: 5
RAS Timeout: 30
RAS Servers
IP Port Secret Phases
10.50.18.32 100 tserver1 authen author account
(Dub)>
To Next Page
Loading...
