Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Controllers and Interfaces: Configuring PPPoE Encapsulation Settings
7-14
7. (optional) Verify that the Ethernet controller for PPPoE has been configured
properly:
show controller ethernet 4
The command response similar to the following displays:
8. Save the configuration.
(Dub)>show controller ethernet 4
ethernet 4 system-name=mii1
status=enabled link-state=down
admin-speed=auto oper-speed=10H
hardware-address=00:40:72:04:2D:9C
default-address=00:40:72:04:2D:9C
proxy-arp=enabled
resource-state=assigned
desc=Ethernet 4
mac-security admin-state=disabled oper-state=disabled
address=00:E0:52:CC:0B:00
address=22:22:22:22:22:22
ppp defaultroute=false
local-method=none local-identity=
remote-method=chap remote-identity=user2
mru=1492 mtu=1492
lcp-requests=enabled
inactivity-timeout=20
(Dub)>
To Next Page
Loading...
