Remote RMX-3200 Version 5.2x Configuration Guide
Configuring a Site VPN Connection: Configuration Example
8-4
After the site VPN connection is established between Client 1 and the Remote RMX-
3200, the client is assigned a point-to-point (site VPN) IP address
192.168.101.6/30.
The peer’s IP address is
192.168.101.5/30 on the Remote RMX-3200. The routes
to the site LAN network are pushed to Client 1. These routes are listed in the Routes
added box at the top of the diagram. The firewall rules are added based on the allow-
access configurations on the Remote RMX-3200 defined by the user.
The Remote RMX-3200 must be configured with the IP address, protocol and port
number that will be used when making connections from the clients to the site network
elements. All other traffic will be blocked by the firewall on the Remote RMX-3200.
To Next Page
Loading...
