Remote RMX-3200 Version 5.2x Configuration Guide
Configuring a Site VPN Connection: Configuring the Site VPN
8-7
5. Verify the configuration:
show controllers openvpn site
The command response similar to the following displays:
6. Show the number of clients that are currently connected to the site VPN:
show controllers openvpn site client-count
The command response similar to the following displays:
(Dub)>show controllers openvpn site
openvpn site system-name=ovpn_site
status=enabled link-state=up
mode=site-server protocol=udp port=1194 cipher=blowfish-128
keep-alive-inactive=30 keep-alive-disconnect=120
client-route=ethernet 3
vpn-state=connected, Thu Jan 10 14:00:45 EDT 2013
cert-subject=/C=US/ST=OH/O=Kentrox, Inc./CN=openvpn token
cert-validity-start=Wed Oct 10 14:42:32 ex 2012
cert-validity-end=Wed Jan 31 17:13:31 EDT 2029
allow-access=192.168.111.100 tcp 20-80 tcp 443 udp 161
allow-access=192.168.111.101 tcp 20-80 tcp 443 udp 161
(Dub)>
(Dub)>show controllers openvpn site client-count
Number of known clients: 0
Number of authenticated clients: 0
(Dub)>
To Next Page
Loading...
