Copier Network Functions
6
IC-402 6-16
2
Note
Be sure to use an authentication method like the one that is used by the
LDAP server. For details, refer to the manual of the LDAP server being
used.
“GSS-SPNEGO” is specified as the authentication method when the
LDAP server uses Active Directory. If “GSS-SPNEGO” is specified, enter
the domain name for Active Directory.
!
Detail
Depending on the authentication method, settings for the following pa-
rameters must be set correctly on the Setting Up LDAP screen (6/6) in or-
der to perform the “Check Connection” operation.
For [Simple] and [DIGEST-MD5]: Login Name
For [GSS-SPNEGO] (Active Directory): Login Name and Domain Name
In addition, if the LDAP server uses Active Directory, a DNS server linked
to Active Directory must be specified from the image controller.
To Next Page
Loading...
