Using PageScope Web Connection
7
IC-402 7-54
4 Specify the desired settings.
!
Detail
The setting that must be specified vary depending on the authentication
method. If “anonymous” is selected, settings for “Domain Name”, “Login
Name”, and “Password” are not required.
2
Reminder
If the LDAP server settings are not specified correctly, network failure
may occur. The server administrator should specify LDAP settings.
2
Note
Be sure to use an authentication method like the one that is used by the
LDAP server. For details, refer to the manual of the LDAP server being
used.
If the authentication method is specified as “GSS-SPNEGO”, enter the
domain name for “Active Directory”.
To Next Page
Loading...
