Scanning Documents
2
IC-402 2-50
3 Type in the name of the mailbox where the data is to be saved.
– Check that the mailbox where the document is to be saved exists
on the hard disk of the image controller, and then correctly type in
the name of the mailbox.
– Correctly type in the mailbox name using uppercase and lowercase
letters.
4 Touch [OK].
The selected destinations are listed under “Broadcast Destinations”.
5 Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-52.
To Next Page
Loading...
