Lexmark CX833 - Page 448

Error codes Error message Solution
52 Not enough free space in flash
memory for resources.
Try one or more of the following:
• Select Continue to clear the message
and continue printing.
• Delete fonts, macros, and other data
stored in the
flash
memory.
• Install a storage drive.
Note: Downloaded fonts and macros
that are not previously stored in the
flash memory are deleted.
58.4 Incorrect output option
configuration.
Turn o the printer, and then install the
correct bin or finisher.
61 Remove defective disk. Replace the defective storage drive.
62 Disk full. Try one or more of the following:
• Select Continue to clear the message
and continue printing.
• Delete fonts, macros, and other data
stored in the storage drive.
• Install a storage drive.
63 Format the disk. Formatting now wipes all information from
the storage drive.
To format the disk, do the following:
1 From the control panel, navigate to
Settings > Device > Maintenance >
Out of Service Erase.
2 Select Sanitize all information on hard
disk, and then select ERASE.
71.01 Fax Station Name not set up.
Contact system administrator.
For more information, see
“Setting up the
fax function using analog fax” on page 73.
71.02 Fax Station Number not set up.
Contact system administrator.
71.03 No analog phone line connected
to modem, fax is disabled.
Check the connection and the line for a
signal. For more information, see
“Setting
up the fax function using analog fax” on
page 73.
71.04 Analog phone line is connected
to the wrong port.
Unplug the phone line, and then connect it
to the LINE port.
71.06 Unable to connect to HTTPS Fax
Server.
Connection to HTTPS Fax Server is
disconnected. Check the Internet
connection of the printer.
71.07 Printer is not registered to
HTTPS Fax Server.
Make sure that the printer is added to the
device list in the HTTPS Fax Server portal.
Contact the system administrator.
71.11 Fax partition. The fax partition is not working. Contact the
system administrator.
Troubleshoot a problem 448