Issue 2.2
Feature Description and Operation Manual
120
7.5 SLT Broker’s Call
Description
A single line telephone user can alternate between two calls maintaining private conversations
with both parties. The parties may be either internal Stations or external CO line calls, and
may be incoming or outgoing.
Operation
To set up a Broker’s Call from a SLT, perform the following Steps:
1. Place or receive first call.
2. Momentarily press the hook-switch, the intercom dial tone is received and the active
call is placed on exclusive hold.
3. Place the second call.
4. Momentarily press the hook-switch to switch between calls.
Consideration
When pressing the hook-switch with an active call places the call on exclusive hold and is
subject to Hold recall.
Reference
A. Unsupervised Conference
B. SLT 3-party Conference
C. Hold
To Next Page
Loading...
