LG-Ericsson ipldk-60 - Initialize Database by MPB Version (PGM 452)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
220
3.17 Initialize Database by MPB Version (PGM 452)
PGM 452 permits initialization of the system database based on the software version.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 452.
3. Select the desired Flexible button.
4. Press the [Hold/Save] button to initialize.
PGM
452
Flex
Btn
Description Default Values
Ver. 3.7 1
Ver. 3.8 2
When upgrading a system to a 3.7 or 3.8 version system software, new database
parameters must be set to the default values. The entire database may be set to
default or using this program only the new parameters are set to default. Flexible
button 1 is used when upgrading to version 3.7 and Flexible button 2 is used when
upgrading to version 3.8.