LG-Ericsson ipldk-60 - SMS CO Line Attributes (PGM 292)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
178
3.10.2 SMS CO Line Attributes (PGM 292)
PGM 292 assigns CO lines and stations to receive external SMS messages.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 292.
3. Enter the CO line range.
4. Select the desired Flexible button.
5. Enter the appropriate value.
6. Press the [Hold/Save] button.
PGM
292
Flex
Btn
Description Default Values
SMS Receive
station
1 This parameter assigns the range of stations to receive SMS messages on the CO
lines in the range.
0 (Off) Station Range +
0 = Off
1 = On
Display SMS
Receive station
2 This Flexible button displays the stations allowed to receive external SMS
messages.
SMS Outgoing
CO
3 When enabled (On), CO lines in the range are used to submit external SMS
messages to the SMS Center.
0 (Off) 0 = Off
1 = On
Non-CID SMS
(Korea Only)
4 When enabled (On) the system will automatically identify incoming SMS calls without
using CLI from the SMS Center, special tone detection is used. (Intended for Korea
only)
0 (Off) 0 = Off
1 = On