Issue 2.2
Feature Description and Operation Manual
25
2.15 Universal Night Answer (UNA)
Description
When the system is in the Night service mode, incoming calls on CO Lines configured for UNA
can be answered by any station in the system with the Universal Night Answer (UNA) code
(refer to Ref. A). Calls on a CO line assigned Night Answer are also generally configured to
ring over External Paging (refer to Ref. B) equipment as a Night Bell. This is achieved using
External Night Ring, which will ring according to the Loud Bell Controls (refer to Ref. C).
Operation
To pick-up a call in Night mode,
1. Dial 5 6 9, the UNA code.
Consideration
If no call is available when the UNA code is dialed, the station receives error tone.
Once answered, the call can be held, transferred, etc. in the normal fashion.
UNA is not restricted to specific station or Intercom Tenant Groups, any station can
answer any UNA call no matter the group assignments.
Reference
A. Day/Night Service Mode
B. External Page
C. Loud Bell
Admin Programming
System Numbering Plan (PGM 107, Flexible button 4)
Assigns the code for UNA
Universal Night Answer (PGM 141, Flexible button 8)
Enables UNA operation for a range of CO Lines
External Night Ring (PGM 160, Flexible button 7)
Enables Loud Bell operation for calls on UNA enabled CO Lines in Night service mode
External Control Contact (PGM 168, Flexible button 1)
Assigns contact function and Loud Bell Control Station
Weekly Time Table (PGM 233)
Establishes the time of day for automatic Day, Night and Weekend system operation
To Next Page
Loading...
