LG-Ericsson ipldk-60 - Toll Exception Tables (PGM 224); Toll Table (PGM 224 - 226)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
156
3.9.4 Toll Table (PGM 224 – 226)
Toll tables are used to enhance the basic COS restrictions by allowing and denying specific digit strings. In Allow and Deny Tables.
3.9.4.1 Toll Exception Tables (PGM 224)
PGM 224 defines the Allow and Deny Tables A to D used to determine Class of Service.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 224.
3. Select the desired Flexible button.
4. Enter the table entry
5. Enter the desired Allow/Deny number.
6. Press the [Hold/Save] button.
PGM
224
Flex
Btn
Description Default Values
Allow Table A 1 This parameter selects a Table index and allowed digit strings for the Allow Table A
used in Station COS 2, 4 and 11.
Not assigned
Deny Table A 2 This parameter selects a Table index and denied digit strings for the Deny Table A
used in Station COS 2, 4, and 11.
Not assigned
Allow Table B 3 This parameter selects a Table index and allowed digit strings for the Allow Table B
used in Station COS 3, 4 and 11.
Not assigned
Deny Table B 4 This parameter selects a Table index and denied digit strings for the Deny Table B
used in Station COS 3, 4 and 11.
Not assigned
Allow Table C 5 This parameter selects a Table index and allowed digit strings for the Allow Table C Not assigned
Table entry number
(01 to 30) +
Allow/Deny number,
(0 ~ 9, ‘*’, ‘#’, and
[DND] as any digit
wild-card entry),
maximum 14 digits