LG-Ericsson ipldk-60 - CO Line (PGM 140-147); CO Service Type (PGM 140)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
59
3.3 CO Line (PGM 140-147)
3.3.1 CO Service Type (PGM 140)
PGM 140 defines the type of CO line service available from the CO line.
Procedure:
1. Press the [TRANS/PGM] button.
2. Dial 140.
3. Enter the CO line Range.
4. Press Flexible button 1 for CO line Type or 2 for service attributes.
5. For Line Type enter the desired Type;
For Normal CO line service attributes, follow the instructions in the table below otherwise enter the desired value.
6. Press the [Hold/Save] button.
PGM
140
Flex
Btn
Description Default Values
Line Type 1 This parameter defines the type of CO line Defines the type of CO line and service. 1 = Normal
2 = T1 DID
3 = ISDN DID/MSN
4 = TIE
5 = DCO DID
TIE ANI
TIE DNIS
Normal CO line
service attributes
2 This parameter defines DISA service for the various ring modes. Select Flexible
button:
Flexible button 1
DISA Service
0 = Off
1 = On