ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
202
3.13.4 IP Phone Attributes (PGM 386)
PGM 386 defines the MAC address of IP Phones allowed to register and displays attributes of registered IP Phones.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 386.
3. Enter the Table index (01 – 16).
4. Select the desired Flexible button.
5. Enter the appropriate value.
6. Press the [Hold/Save] button.
PGM
386
Flex
Btn
Description Default Values
Set MAC
Address
1 This parameter defines the MAC address of each IP Phone, up to 16, the ipLDK-60
should register to the system.
00-00-00-00-00-
00
12-hex digits (0 ~ F)
IP Address
Display
2 This Flexible button displays the IP Address of the IP phone. Display only
Port View 3 This Flexible button displays the Station Number of IP phone. Display only
Port Number
View
4 This Flexible button displays the Port Number of IP phone. Display only
NAT IP Address
Display
5 This Flexible button displays the NAT IP Address of IP phone. Display only
NAT Port
Number
6 This Flexible button displays the NAT Port Numbers being used. Display only
STUN Enabled 7 This Flexible button displays the IP Phone NAT-PAT status as NAT, PAT, NAT and
PAT or None.
Display only
To Next Page
Loading...
