Issue 2.2
Feature Description and Operation Manual
209
14.4 CLIR/COLR (Calling/Connected Line Identification Restriction)
Description
The system will send calling and connected party identification to the ISDN in the appropriate
messages. Identification messages may be restricted, not reported, to the far-end user.
Calling Line Identification Restriction and Connected Line Identification Restriction may be
enabled in the system or the user may assign Flexible buttons for restricting CLIP and COLP on
a per call basis.
Operation
To activate CLIR or COLR, before placing or answering an ISDN call
1. Press the {CLIR} or {COLR} Flexible button.
Consideration
This feature may not be available in the specific ISDN service area or may be a
subscription service.
Reference
A. Outgoing Call ID Service
B. User Station Programming
C. Flexible Buttons
Admin Programming
ISDN CLIR (PGM 114, Flexible button 14)
Restricts sending CLI when the station places an ISDN call
ISDN CLOR (PGM 114, Flexible button 15)
Restricts sending COL when the station answers an ISDN call
To Next Page
Loading...