Issue 2.2
Feature Description and Operation Manual
68
2. Dial the station number to receive the call transfer.
3. When the station answers, announce the call transfer.
4. Replace the handset and go on-hook to complete the transfer.
Consideration
An SLT conducting a transfer can speak to either party by momentarily pressing the hook-
switch to activate a Broker’s Call.
It is impossible to transfer a call to another busy SLT from an SLT. When receiving busy
tone, the SLT user can be connected to the CO Line with hook-flash.
Reference
A. Broker’s Call
B. CO line Call Hold
Admin Programming
Voice Over (PGM 113, Flexible button 6)
Enables a station to receive a Voice Over call when busy
Caller Voice Over (PGM 111, Flexible button 22)
Enables a station to place a Voice over call to a busy station
Transfer Recall Timer (PGM 180, Flexible button 7)
Sets the time a call will remain on Transfer Hold before recalling the transferring station
I-Hold Recall Timer (PGM 180, Flexible button 5)
Sets the time the holding station will ring before the Attendant also receives recall
Attendant Recall Timer (PGM 180, Flexible button 1)
Sets the time the Attendant and holding station ring before the call is dropped
To Next Page
Loading...
