Issue 2.2
Feature Description and Operation Manual
217
14.9 Prefix Code Dialing Service (Ukraine)
Description
When a user dials a number, the system compares the digits with the Enblock Code Table, if a
match is found; the call is processed based on the Enblock Code Table instructions.
Consideration
Prefix code dialing only applies to ISDN lines.
In the Enblock Code Table, the Prefix code entry can include any digit ‘0 ~ 9’ or ‘D’ (DND
button) as a wild card allowing any digit.
If Sending Complete (Enblock mode) is enabled, the system will wait to send the ISDN
Call Set-up message until the user dials the maximum allowed digits or the Enblock Inter-
digit timer expires.
Admin Programming
Prefix Table Index (PGM143, Flexible 16)
Enblock Prefix Table (PGM 205)
Assigns Prefix codes and call processing instructions
Enblock Inter-digit Timer (PGM 182, Flexible 10)
Sets the maximum time the system will wait between user dialed digits
To Next Page
Loading...
