Issue 2.2
Feature Description and Operation Manual
89
5.3 Flexible Buttons
Description
The Flexible buttons of a DKT or DSS/DLS Console can be assigned for access to CO lines as
well as one-button access to other stations and features of the system. The Flexible buttons
can be defined by the user or through System Admin. Functions available for Flexible buttons
include:
CO line Accesses the assigned CO Line
CO line Group Accesses the highest numbered CO Line from a specified CO
Line Group
Loop Access incoming and outgoing calls on CO Lines that are not
assigned to a another button of the DKT
DSS/BLF Calls and displays status (idle, busy, ringing, DND, etc.) of the
assigned Station
Mailbox Calls or transfers calls to the Mailbox and displays message
status for the Mailbox
Numbering Plan Dial codes shown below for one-button feature access,
Paging codes including Meet-Me
Internal All Call Page
Meet Me Page
External Page Zone
All Call Page (Int & Ext)
SMDR Account Code Enter
Call Forward, must include type and destination
Cancel DND/FWD/Pre-MSG
ACD Reroute
Alarm Reset
Group Call Pickup
Night Answer
Call Park
Direct Call Pickup
CO Line Group, if allowed in PGM 112, Flexible button 6
CO Line, if allowed in PGM 112, Flexible button 6
Access CO Line In the 1
st
CO Line
Attendant Call
Door Open Code
Conference Room
Speed Dial Accesses a memory dialing feature (System or Station Speed
Dial, Saved Number Redial, Last number Redial)
Station Group Call a Station/Hunt Group number
Telephone Number Dials an outside Telephone Number, for LDP-6230D/6212D
only.
Feature button Feature buttons including Call Coverage, Conference, Call
Back, DND/FOR, Flash, Mute, On/Off, or Redial
Operation
To assign a Feature button at the DKT,
To Next Page
Loading...
