LG-Ericsson ipldk-60 - Gatekeeper Settings (PGM 341)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
190
3.12.2 GateKeeper Settings (PGM 341)
PGM 341 configures the system to match the H.323 GateKeeper characteristics.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 341.
3. Select the desired Flexible button.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
PGM
341
Flex
Btn
Description Default Values
GK Usage 1 When enabled (On), the ipLDK will employ the GateKeeper to route all H.323 VoIP
outgoing calls.
0 (Off) 0 = Off
1 = On
GK Call Mode 2 This parameter determines the GateKeeper Call routing mode. 0 (Direct) 0 =Direct
1 = GK Reroute
GK Open H245 3 This parameter determines if the system will open an H.245 channel for H.323 VoIP
calls.
0 (Off) 0 = Off
1 = On
GK H245
Tunneling
4 This parameter determines if the GateKeeper will employ tunneling for H.245
messages.
0 (Off) 0 = Off
1 = On
GK Pre-granted
ARQ
5 When enabled (On), the GateKeeper has pre-granted admission to the GateKeeper
by the system.
0 (Off) 0 = Off
1 = On
GK Out of Band
Flash
6 Not used
GK Time to Live 7 This parameter sets the duration between RRQ (Registrar Request) messages from
the VOIB to the GateKeeper as a keep-alive message.
030 seconds 000 ~ 250 in 1
second increments