ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
143
3.8.2 COLP/CLIP Table (PGM 201)
PGM 201 assigns the CLI/COL used for ISDN/IP CO line calls when a Table index is assigned in PGM 143, Flexible button 1 or 2.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 201.
3. Enter the desired COLP Table index.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
PGM
201
Flex
Btn
Description Default Values
COLP/CLIP This parameter defines the COLP/CLIP to be presented to the ISDN/IP CO line when
a station makes or receives a call. The entry used is based on the index assigned in
PGM 143, Flexible button 1 and 2.
10 digits, 0 ~ 9
To Next Page
Loading...
