LG-Ericsson ipldk-60 - System Speed Zone (PGM 232)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
168
3.9.9 System Speed Zone (PGM 232)
PGM 232 configures the parameters for the System Speed Zone groups.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 232.
3. Enter a Zone number, 01 - 10.
4. Select the desired Flexible button.
5. Enter the appropriate value.
6. Press the [Hold/Save] button.
PGM
232
Flex
Btn
Description Default Values
Speed Bin Range
in Zone
1 This parameter assigns System Speed Dial bins to a Speed Zone. Only Speed Dial
bins 2200 to 2499 can be assigned to a zone. Speed bins 2000 ~ 2199 cannot be
assigned to a System Speed Zone,
Zone 1, 2200-
2499,
Zones 2 ~ 10 not
assigned
Range between
2200 - 2499
Station Range to
Access Zone
2 This parameter assigns stations allowed access to Speed Dial bins in the zone.
Select the Flexible button associated with a station or enter a station range.
Zone 1, All
stations allowed
access
Flexible button 1 – 4
or a station range
Toll Checking 3 This parameter determines if the system will enforce Toll Restriction when a station
attempts access to a Speed Dial bin in the zone.
All zones,1 (On) 0 = Off
1 = On
Authorization
Check
4 When enabled (On), the system requests an Authorization code when a station
attempts access to a Speed Dial bin in the zone.
Zone 1, 0 (Off)
Others 1 (On)
0 = Off
1 = On