LG-Ericsson ipldk-60 - Station (PGM 110 - 131); Station ID, Name & DSS;DLS Map (PGM 110)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
21
3.2 Station (PGM 110 – 131)
3.2.1 Station Id, Name & DSS/DLS Map (PGM 110)
PGM 110 defines the type of terminal employed for a range of stations. In addition, where a station has an associated DSS Console, one of three
maps or templates establishes the default configuration of the Flexible buttons.
Procedure:
1. Press the [TRANS/PGM] button.
2. Dial 110.
3. Enter the appropriate Station Range.
4. Select the desired Flexible button from the chart below.
5. Enter the appropriate value.
6. Press the [Hold/Save] button.
PGM
110
Flex
Btn
Description Default Values
Station ID 1 This parameter defines the type of terminal attached and must be assigned if other
than default (DKTU o SLT).
DKTU or SLT 01 = DKT
05 = ICM Box
07 = SLT (DTMF)
08 = SLT (PULSE)
12 = SLT–CID (FSK)
13 = SLT–CID
(DTMF)
14 = IP Phone
Station Name PC This parameter assigns the display name for the station; the station LCD, while idle, 12 characters