LG-Ericsson ipldk-60 - Lcr (Pgm 220 - 223); LCR Attributes (PGM 220)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
148
3.9.3 LCR (PGM 220 - 223)
3.9.3.1 LCR Attributes (PGM 220)
PGM 220 defines the LCR access mode, and time and day for each of three zones or groups for LCR access.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 220.
3. Select the desired Flexible button.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
PGM
220
Flex
Btn
Description Default Values
LCR Access 1 This parameter defines the user-action that will access LCR. The user activates
LCR in one of six modes. Modes provide for activation when the user:
Dials while receiving internal dial tone (Internal),
Accesses a CO line with a CO line/Group button, or by dialing a CO line/Group
access code (Direct) or
Accesses a CO line with a Loop button or by dialing‘9’.
00 00 = LCR disabled
01 = Dial 9
02 = Internal & Loop
11 = Loop & Direct
12 = All with Loop
access immediately
13 = All with Loop
access delay
Day Zones
(groups)
2 This parameter divides the days-of-week into one of three groups (Day Zones) for
separate LCR treatment. Each day, Monday through Sunday represented
respectively by Flexible button 1 ~ 7, is assigned to a zone.
All days
1 (Day Zone 1)
Flexible button 1 ~ 7
+ 1 ~ 3 (day zone)
Time zones for 3 This parameter assigns three time zones for the day-of-week grouping 1 (Day Zone Flexible button 1 ~3 +