ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
169
3.9.10 Weekly Time Table (PGM 233)
PGM 233 configures separate Weekly Time Tables to control Auto Ring mode for the system and each Intercom Tenancy Group.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 233.
3. Dial ‘0 ~ 5’; ‘0’ is for the system and ‘1 ~ 5’ are for the individual Intercom Tenancy Groups.
4. Select Flexible button ‘1 – 7’ for Monday to Sunday, respectively.
5. Select the Flexible button for the desired time entry.
6. Enter the desired Time as four (4) digits.
7. Press the [Hold/Save] button.
PGM
233
Flex
Btn
Description Default Values
Day 1 This parameter defines the start time for Day mode service when Auto Ring service
is active.
Mon – Fri
09:00
4 digits, 0000 ~ 23:59
Night 2 This parameter defines the start time for Night mode service when Auto Ring service
is active.
Mon – Thu
18:00
4 digits, 0000 ~ 23:59
Weekend 3 This parameter defines the start time for Weekend mode service when Auto Ring
service is active.
Fri
18:00
4 digits, 0000 ~ 23:59
Lunch Start 4 This parameter defines the start time for Lunch mode service when Auto Ring
service is active.
Not assigned 4 digits, 0000 ~ 23:59
Lunch End 5 This parameter defines the end time for Lunch mode service when Auto Ring service
is active.
Not assigned 4 digits, 0000 ~ 23:59