ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
54
3.2.18 Virtual Mailbox Attributes (PGM 129)
PGM 129 defines Attributes for Virtual mailboxes including notification, Mail access privileges, and Company Directory names associated with the
mailbox.
Procedure:
1. Press the [TRANS/PGM] button.
2. Dial 129.
3. Enter the Virtual Mailbox number (200 – 249)
4. Selected desired Flexible button from the chart below
5. Enter the desired value.
6. Press the [Hold/Save] button.
PGM
129
Flex
Btn
Description Default Values
Administrative
Mailbox
1 A mailbox can be assigned to allow access to other mailboxes and other
administrative functions.
0 (Disable) 0 = Disable
1 = Enable
VMIB access 2 The VMIB Access parameter enables the Virtual Voice Mailbox to receive calls. 0 (Disable) 0 = Disable
1 = Enable
Class of Service 3 Each mailbox can be assigned a COS to define specific characteristics of the
mailbox including message storage limitations and message delivery options, refer to
PGM 238.
1 1 ~ 5
Announce Only 4 A mailbox can be configured to provide an announcement only and will not provide
incoming message storage.
0 (Disable) 0 = Disable
1 = Enable
Action after
Announcement
5 When configured as an “Announcement Only” mailbox, the system will either
disconnect the call or return the caller to the previous announcement
0 (hang-up) 0 = Hang-up
1 = Previous
To Next Page
Loading...
