LG-Ericsson ipldk-60 - System Data (PGM 160 - 184); System Attributes I (PGM 160)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
81
3.5 System Data (PGM 160 – 184)
3.5.1 System Attributes I (PGM 160)
PGM 160 defines general system attributes.
Procedure:
1. Press the [TRANS/PGM] button.
2. Dial 160.
3. Press the desired Flexible button.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
PGM
160
Flex
Btn
Description Default Values
Attendant Call
Queue Ring
Back/MOH
1 If this parameter is RBT, Ring Back Tone is provided to the station when calling a
busy Attendant otherwise hold tone or VMIB-MOH is provided as defined in PGM
171, Flexible button 2.
0 (MOH) 0 = MOH
1 = Ring Back Tone
Camp-on Call
RBT/MOH
2 If this parameter is RBT, Ring Back Tone is provided to the camped on party
otherwise MOH is provided.
0 (MOH) 0 = MOH
1 = RBT
CO Line Choice 3 This parameter defines the method the system will use to secure a CO line from a
CO Group, Last (highest numbered) or Round Robin.
1 (Last) 0 = Round Robin
1 = Last
DISA Retry
Counter
4 This parameter determines the number of times a DISA caller can retry dialing a
station or feature code before being routed to the DID/DISA Destination (PGM 167).
3 0-9
ICM Continuous
Dial Tone
5 This parameter determines if Intercom dial tone is continuous or interrupted
(discontinuous).
1 (continuous) 0 = Discontinuous
1 = Continuous