LG-Ericsson ipldk-60 - Networking CO Line Attributes (PGM 322)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
183
3.11.3 Networking CO Line Attributes (PGM 322)
PGM 322 establishes characteristics of CO lines used for Private Networking.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 322.
3. Enter the CO line range.
4. Select the desired Flexible button.
5. Enter the appropriate value.
6. Press the [Hold/Save] button.
PGM
322
Flex
Btn
Description Default Values
Networking CO
Line Group
1 This parameter defines the Network CO line Group number. This parameter does
not relate to the normal CO line Group number.
00 00 ~ 24
VOIB Mode 2 This parameter defines the VoIP protocol used by the VOIB on CO lines, H.323 or
SIP.
1 (SIP) 0 = H.323
1 = SIP
Use Gatekeeper 3 When enabled (On), the system employs the GateKeeper to route calls. Otherwise,
the call is routed directly over the network.
0 (Off) 0 = Off
1 = On
Networking CO
Line Type
4 This parameter defines the type of system connected to a networked system CO
line, PSTN or Networked system.
0 (PSTN) 0 = PSTN
1 = Network
DTMF Mode 5 This parameter defines the DTMF signaling mode employed on the CO line for
networking.
2 (In-band
DTMF)
2 = In-band DTMF
3 = RFC2833 DTMF
4 = Out-band DTMF