LG-Ericsson ipldk-60 - Private Networking (PGM 320 - 324); Networking Basic Attributes (PGM 320)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
179
3.11 Private Networking (PGM 320 - 324)
3.11.1 Networking Basic Attributes (PGM 320)
PGM 320 enables Networking and defines basic attributes for network signaling and CAS.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 320.
3. Select the desired Flexible button.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
PGM
320
Flex
Btn
Description Default Values
Networking
Enable
1 This parameter enables the Private Network feature. The Networking lock-key must
be installed.
0 (Off) 0 = Off
1 = On
Networking Retry
Count
2 This parameter defines the number of times the system will attempt a network
connection to a PSTN line. This parameter does not affect a direct connection
between two networked systems.
00 00 ~ 99
Networking CNIP
Enable
3 When enabled (On), the system displays the name of the calling station in the LCD
of the called station.
1 (On) 0 = Off
1 = On
Networking
CONP Enable
4 When enabled (On), the system displays the name of the answering station in the
LCD of the calling station.
0 (Off) 0 = Off
1 = On
Networking
Signal Method
5 This parameter determines the message, information element type used for
supplementary network service messages. The system employs either the Facility
1 (Facility) 0 = User-to-User
1 = Facility