ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
180
PGM
320
Flex
Btn
Description Default Values
or the User-to-User Information element as assigned here.
Networking CAS
Enable
6 This parameter enables Centralized Attendant Service for the system. CAS should
not be enabled at the system where the CAS Attendant is located.
0 (Off) 0 = Off
1 = On
Networking VPN
Enable
7 Reserved 0 (Off) 0 = Off
1 = On
Networking CC
Retain Mode
8 When enabled (On), the system employs the Call Completion Retain mode for
supplementary services.
0 (Off) 0 = Off
1 = On
To Next Page
Loading...
