LG-Ericsson ipldk-60 - System Attributes II (PGM 161)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
84
3.5.2 System Attributes II (PGM 161)
PGM 161 defines general system attributes.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 161.
3. Press the desired Flexible button.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
PGM
161
Flex
Btn
Description Default Values
PX
Time/Day/Month
1 This parameter determines if the System Time and Date are set manually (Off, see
PGM 178) or based on the Time and Date from the ISDN (On).
0 (Off) 0 = Off
1 = On
Off-Hook Ring
Type
2 This parameter determines if the system will use muted ring or a single ring burst for
the off-hook ring signal.
1 (Muted ring) 0 = Single Burst
1 = Muted ring
Override 1
st
CO
Line Group
3 When enabled (On), if the user dials ‘9’, the system will search all CO Groups for an
idle CO line starting with the 1
st
CO Group otherwise, only CO Group 1 is searched.
1 (On) 0 = Off
1 = On
Page Warning
Tone
4 When enabled (On) a warning tone is sent over a page prior to establishing an audio
path with the paging user.
1 (On) 0 = Off
1 = On
Auto Privacy 5 If this parameter is ‘On’, a call cannot be overridden by a station with Override
Privilege, see PGM 113, Flexible button 4
1 (On) 0 = Off
1 = On
Privacy Warning
Tone
6 If this parameter is ‘On’, when a call is intrude upon or overridden, a warning tone is
sent to the parties on the call.
1 (On) 0 = Off
1 = On
Single Ring for
CO Call
7 This parameter determines the cadence of CO line and Intercom ring. If ‘Yes’, the
Intercom ring cadence is 1 second on and 4 seconds off and the CO line ring
0 (No) 0 =No
1= Yes