ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
124
3.5.22 In-Room Indication (PGM 183)
PGM 183 defines the Supervisor for In-Room groups and members that receive the In-Room indication.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 183.
3. Enter the In-Room Table index (01 ~ 10)
4. Select the desired Flexible button.
For Member assignment press Flexible button 2 then select a Flexible button, 1 ~ 4, for up to four (4) members.
5. Enter the appropriate value.
6. Press the [Hold/Save] button.
PGM
183
Flex
Btn
Description Default Values
In-Room Group
Supervisor
1 This parameter defines the In-Room group (01 to 10) Supervisor station that will
control the In-Room indication for the group.
Not assigned
Station number of
Supervisor
In-Room Group
Member
2 This parameter assigns members to an In-Room Group, maximum 4 members. The
members’ In-Room button illuminates when the Supervisor activates the In-Room
indicator by pressing the Supervisor’s In-Room button.
Not assigned
Flexible button 1 ~ 4
Station number
To Next Page
Loading...
