ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
128
3.6.2 DCOB Attributes II (PGM 187)
PGM 187 is one of several programs that define attributes of digital (E1) lines, also see PGM 186
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 187.
3. Enter the appropriate CO Line range
4. Select the desired Flexible button.
5. Enter the appropriate value.
6. Press the [Hold/Save] button.
PGM
187
Flex
Btn
Description Default Values
In-Digit Type 1 This parameter defines the type of incoming signaling from a digital CO line. 2 (R2MFC) 0 = Pulse
1 = DTMF
2 = R2MFC
Out-Digit Type 2 This parameter defines the type of outgoing signaling provided on digital CO lines. 2 (R2MFC) 0 = Pulse
1 = DTMF
2 = R2MFC
CLI Digit Number 3 This parameter defines the number of digits expected as the Calling Line
Identification from digital CO lines.
10 CO line range + 1 ~
15 digits, 0 - 9
DCOB TYPE 4 This parameter determines if the digital CO lines support both-way calling protocols
of Sweden or Italy, or one-way protocols according to Korea standards.
2 0 = Sweden/Cyprus
1 = Italy
2 = Korea/Australia
Send S-Block
Command
5 Not used 0 = Off
1 = On
To Next Page
Loading...
