ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
131
3.7.2 Station Group Attributes (PGM 191)
PGM 191 defines the attributes of each Station Group based on the Type of group (PGM 190) as shown in sections 3.7.2.1 ~ 3.7.2.6.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 191.
3. Select the desired Flexible button.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
3.7.2.1 Circular & Terminal Hunt Group Attributes
PGM 191
Circular/Terminal
Flex
Btn
Description Default Values
VMIB Announce
1 Timer
1 This parameter defines the time the system waits to automatically answer an
incoming call and play the assigned VMIB announcement (Flexible button 3)
015 seconds 000 ~ 999 in 1
second increments
VMIB Announce
2 Timer
2 This parameter defines the time the system waits after playing the first
announcement to play the assigned VMIB announcement 2 (Flexible button 4) to a
queued call.
000 seconds 000 ~ 999 in 1
second increments
VMIB Announce
1 Location
3 This parameter assigns the VMIB announcement number to play when the VMIB
Announce 1 timer (Flexible button 1) expires.
Not assigned 00 ~ 70
VMIB Announce
2 Location
4 This parameter assigns the VMIB announcement number to play when the VMIB
announce 2 timer (Flexible button 2) expires.
Not assigned 00 ~ 70
VMIB Announce
2 Repeat Timer
5 This parameter sets the interval between the playbacks of VMIB Announcement 2
when repeating (Flexible button 6) is enabled.
000 seconds 000 ~ 999 in 1
second increments
VMIB Announce
2 Repeat
6 When enabled (On), the ipLDK will repeat the VMIB Announcement 2 (Flexible
button 4) at intervals (Flexible button 5) to queued calls.
0 (Off) 0 = Off
1 = On
To Next Page
Loading...