ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
132
PGM 191
Circular/Terminal
Flex
Btn
Description Default Values
Enable/Disable
Overflow
Destination
7 When assigned, calls to a station in the group queue until answered or each station
in the group has been tried. The call remains at the last station in the group or
routes to the overflow destination after the Overflow timer (Flexible button 8) expires.
Not assigned 1 = Station #
2 = Hunt #
3 = VMIB 00-70 (00:
disable)
4 = System Speed #
(2000-2499)
Overflow Timer 8 This parameter sets the interval a call will queue to a group before routing to the
Overflow destination (Flexible button 7).
180 seconds 000 ~ 600 in 1
second increments
Wrap-up Timer 9 This parameter sets the duration a station remains unavailable after completing a
call.
002 seconds 000 ~ 999 in 1
second increments
No Answer Timer 10 This parameter sets the duration a station receives ring before the call is routed to
the next idle station in the group.
15 seconds 00 ~ 99 in 1 second
increments
Pilot Hunt 11 If this parameter is enabled (On), calls to a member that are not answered route to
the Hunt Group. A circular/terminal hunt group can be assigned with a pilot number
so that only calls to the pilot number route to the Hunt Group.
1 (On) 0 = Off
1 = On
Alt If No Member 12 When enabled (On), if a member is not on duty, intercom calls drop and CO
incoming calls route to the assigned Alternate destination, Flexible button 14.
0 (Off) 0 = Off
1 = On
Music Source 13 This parameter determines if a queued caller receives Ringback tone or MOH. 0 0 = Not assigned
1 = Internal Music
2 = External Music
3 = Not in ipLDK-60
4-8 = SLT MOH
9 = Hold tone
Alt Destination 14 This parameter assigns the Alternate destination when calls are received and no Not assigned 1 + station number
To Next Page
Loading...
