ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
1
1 MANUAL INTRODUCTION
This manual provides detailed information related to configuring the
system database through Admin Programming. Program parameter
descriptions in Section 3 are appropriate for both a Digit Key
Telephone and the ipLDK PC Admin. The step-by-step procedures in
this manual are given for DKT programming. For PC Admin
procedures refer to the PC Admin User manual.
This manual is divided in to five (5) sections:
Manual Introduction
Admin Programming Overview
Admin Programming Procedures
Admin Programming Index
User and Attendant Station Programming Charts
1.1 Section Descriptions
1.1.1 Manual Introduction
Section 1, this section, is an introduction to the manual. It provides a
description and purpose for each of the sections of the manual.
1.1.2 Admin Programming Overview
Section 2 is an overview of Admin programming, how the various
Programs (PGMs) are grouped and general information on using a
DKT for access and modifying parameters. It includes a brief
discussion of the function of the DKT buttons while in the
Programming mode.
1.1.3 Admin Programming Procedures
Section 3 provides detailed procedures to access each of the
Programs using a DKT. It includes detailed but brief descriptions of
each PGM parameter as well as the North American default values
and range of values that a parameter can accept.
1.1.4 Admin Reference Charts
Section 4 is an index for quick reference to the various PGMs available
in the ipLDK-60. Also, in this section are the codes for the eight (8)
default Flexible System Numbering Plans.
1.1.5 Quick Reference Charts
Section 5 provides reference charts for use in station programming for
the user and Attendant. In addition, reference charts are provided for
the Flexible button assignment.
To Next Page
Loading...