ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
136
PGM 191
ACD/UCD
Flex
Btn
Description Default Values
the station in UCD DND and unavailable for group calls. A setting of ‘00’ disables
automatic ACD DND.
increments
Queued call Tone 22 When enabled (On), the first group member assigned in Program 190 for the group
receives a single 0.4 second burst of muted ring when a call is queued to the group.
0 (Off) 0 = Off
1 = On
Group Name
Assign
23 This parameter assigns a name, maximum 12 characters, to the group. Not assigned 12 Characters
Call Coverage 24 The Call Coverage parameter enables coverage for the Hunt Group. A Call
Coverage Flexible button at a covering station for the group will be active. The
covering station must have a Coverage button set using Station User Program
codes, 46 and group number.
Flexible button 1 = Hunt Coverage Mode On/Off
Flexible button 2 = Delay Ring Cycle
Button 1 =0 (Off)
Button 2 = 0
0 = Off
1 = On
0 ~ 9 cycles
3.7.2.3 Ring Group Attributes
PGM 191
Ring
Flex
Btn
Description Default Values
VMIB Announce
1 Timer
1 This parameter defines the time the system waits to automatically answer an
incoming call and play the assigned VMIB announcement (Flexible button 3)
015 seconds 000 ~ 999 in 1
second increments
VMIB Announce
2 Timer
2 This parameter defines the time the system waits after playing the first
announcement to play the assigned VMIB announcement 2 (Flexible button 4) to a
queued call.
000 seconds 000 ~ 999 in 1
second increments
VMIB Announce
1 Location
3 This parameter assigns the VMIB announcement number to play when the VMIB
Announce 1 timer (Flexible button 1) expires.
Not assigned 00 ~ 70
VMIB Announce 4 This parameter assigns the VMIB announcement number to play when the VMIB Not assigned 00 ~ 70
To Next Page
Loading...
