ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
137
PGM 191
Ring
Flex
Btn
Description Default Values
2 Location announce 2 timer (Flexible button 2) expires.
VMIB Announce
2 Repeat Timer
5 This parameter sets the interval between the playbacks of VMIB Announcement 2
when repeating (Flexible button 6) is enabled.
000 seconds 000 ~ 999 in 1
second increments
VMIB Announce
2 Repeat
6 When enabled (On), the ipLDK will repeat the VMIB Announcement 2 (Flexible
button 4) at intervals (Flexible button 5) to queued calls.
0 (Off) 0 = Off
1 = On
Overflow
Destination
7 When assigned, calls to a station in the group queue until answered or each station
in the group has been tried. The call remains at the last station in the group or
routes to the overflow destination after the Overflow timer (Flexible button 8) expires.
Not assigned 1 = Station #
2 = Hunt #
3 = VMIB 00-70 (00:
disable)
4 = System Speed #
(2000-2499)
Overflow Timer 8 This parameter sets the interval a call will queue to a group before routing to the
Overflow destination (Flexible button 7).
180 seconds 000 ~ 600 in 1
second increments
Wrap-up Timer 9 This parameter sets the duration a station remains unavailable after completing a
call.
002 seconds 000 ~ 999 in 1
second increments
Music Source 10 This parameter determines if a queued caller receives Ringback tone or MOH. 0 0 = Not assigned by
this field.
1 = Internal Music
2 = External Music
3 = Not in ipLDK-60
4-8 = SLT MOH
9 = Hold tone
Max. Queued
Call Count
11 This parameter determines the maximum number of calls that can queue to the
Group. When the queued calls exceed the Maximum Queued Call Count, additional
calls are ignored.
99 00 ~ 99
To Next Page
Loading...
