Issue 2.2
Feature Description and Operation Manual
47
3.12.5 Save Number Redial
Description
The last dialed number on a CO/IP call may be stored (up to 32 digits) in a buffer for future
redial. This number is saved in memory until the user requests a new number be stored.
Numbers dialed for subsequent calls do not affect the Save Number buffer.
Operation
To save a number in the Save Number Redial buffer from a DKT,
1. While on an active outgoing call, press the [SPEED] button twice,
2. When the active call is complete, replace the handset or go on-hook.
To place a Save Number Redial call,
1. Lift the handset or press the On/Off button.
2. Press the [SPEED] button.
3. Press the # button.
Consideration
When the CO line originally used is busy, an idle CO line in the group is accessed and the
saved number is dialed.
The stored Save Number is not deleted if the system should lose power.
To Next Page
Loading...
