ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
133
PGM 191
Circular/Terminal
Flex
Btn
Description Default Values
members are on-duty or all members are busy. Alternate destination routing must
be enabled, see Flexible button 12.
2 + Hunt Group
MAX Queue
Count
15 This parameter determines the maximum number of calls that can queue to the
Group. When the queued calls exceed the Maximum Queued Call Count, additional
calls are ignored.
99 00 ~ 99
Hunt Member
forward
16 When enabled (On), a member with Call Forward active will not receive Hunt Group
calls; the member is considered unavailable for group calls.
1 (On) 0 = Off
1 = On
Queue Count
Display
17 When enabled (On), the LCD of member stations displays the Queue Call Count. 1 (On) 0 = Off
1 = On
Group Name
Assign
18 This parameter assigns a name, maximum 12 characters, to the group. Not assigned 12 Characters
Call Coverage 19 The Call Coverage parameter enables coverage for the Hunt Group. A Call
Coverage Flexible button at a covering station for the group will be active. The
covering station must have a Coverage button set using Station User Program
codes, 46 and group number.
Flexible button 1 = On/Off
Flexible button 2 = Delay Ring Cycle
Button 1 = 0 (Off)
Button 2 = 0
0 = Off
1 = On
0 ~ 9 cycles
3.7.2.2 ACD/UCD Hunt Group Attributes
PGM 191
ACD/UCD
Flex
Btn
Description Default Values
VMIB Announce
1 Timer
1 This parameter defines the time the system waits to automatically answer an
incoming call and play the assigned VMIB announcement (Flexible button 3)
015 seconds 000 ~ 999 in 1
second increments
VMIB Announce 2 This parameter defines the time the system waits after playing the first 000 seconds 000 ~ 999 in 1
To Next Page
Loading...
