ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
134
PGM 191
ACD/UCD
Flex
Btn
Description Default Values
2 Timer announcement to play the assigned VMIB announcement 2 (Flexible button 4) to a
queued call.
second increments
VMIB Announce
1 Location
3 This parameter assigns the VMIB announcement number to play when the VMIB
Announce 1 timer (Flexible button 1) expires.
Not assigned 00 ~ 70
VMIB Announce
2 Location
4 This parameter assigns the VMIB announcement number to play when the VMIB
announce 2 timer (Flexible button 2) expires.
Not assigned 00 ~ 70
VMIB Announce
2 Repeat Timer
5 This parameter sets the interval between the playbacks of VMIB Announcement 2
when repeating (Flexible button 6) is enabled.
000 seconds 000 ~ 999 in 1
second increments
VMIB Announce
2 Repeat
6 When enabled (On), the ipLDK will repeat the VMIB Announcement 2 (Flexible
button 4) at intervals (Flexible button 5) to queued calls.
0 (Off) 0 = Off
1 = On
Overflow
Destination
7 When assigned, calls to a station in the group queue until answered or each station
in the group has been tried. The call remains at the last station in the group or
routes to the overflow destination after the Overflow timer (Flexible button 8) expires.
Not assigned 1 = Station #
2 = Hunt #
3 = VMIB 00-70 (00:
disable)
4 = System Speed #
(2000-2499)
Overflow Timer 8 This parameter sets the interval a call will queue to a group before routing to the
Overflow destination (Flexible button 7).
180 seconds 000 ~ 600 in 1
second increments
Wrap-up Timer 9 This parameter sets the duration a station remains unavailable after completing a
call.
002 seconds 000 ~ 999 in 1
second increments
Alt If No Member 10 When enabled (On), if a member is not on duty, intercom calls drop and CO
incoming calls route to the assigned Alternate destination, Flexible button 13.
0 (Off) 0 = Off
1 = On
Music Source 11 This parameter determines if a queued caller receives Ringback tone or MOH. 0 0 = Not assigned
1 = Internal Music
2 = External Music
To Next Page
Loading...
