ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
51
3.2.17 Station Mailbox Attributes (PGM 127)
PGM 127 defines the characteristics of a Voice Mailbox including COS, Outbound notification of new messages and e-mail notification.
Procedure:
1. Press the [TRANS/PGM] button.
2. Dial 127.
3. Enter the appropriate Voice Mailbox range.
4. Select the desired Flexible button from the chart below.
5. Enter the desired parameter value.
6. Press the [Hold/Save] button.
PGM
127
Flex
Btn
Description Default Values
Administrative
Mailbox
1 A mailbox can be assigned to allow access to other mailboxes and other
administrative functions.
0 (Disable) 0 = Disable
1 = Enable
Class of Service 2 Each mailbox can be assigned a COS to define specific characteristics of the
mailbox including message storage limitations and message delivery options, refer to
PGM 238.
1 1 ~ 5
Announce Only 3 A mailbox can be configured to provide an announcement only and will not provide
incoming message storage. The Announce Only mailbox can be used for Automatic
Park and Page.
0 (Disable) 0 = Disable
1 = Enable
Action after
Announcement
4 When configured as an “Announcement Only” mailbox, the system will either
disconnect the call or return the caller to the previous announcement
0 (hang-up) 0 = Hang-up
1 = Previous
VM ON
(Outbound
Notification)
5 The system can be configured to notify the user of new messages by placing an
outbound telephone call.
0 (Disable) 0 = Disable
1 = Enable
To Next Page
Loading...
