ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
138
PGM 191
Ring
Flex
Btn
Description Default Values
VMIB Supervisor 12 Not used
Hunt Member
forward
13 When enabled (On), a member with Call Forward active will not receive Hunt Group
calls; the member is considered unavailable for group calls.
1 (On) 0 = Off
1 = On
Queue Count
Display
14 When enabled (On), the LCD of member stations displays the Queue Call Count. 1 (On) 0 = Off
1 = On
Group Name
Assign
15 This parameter assigns a name, maximum 12 characters, to the group. Not assigned 12 Characters
Call Coverage 16 The Call Coverage parameter enables coverage for the Hunt Group. A Call
Coverage Flexible button at a covering station for the group will be active. The
covering station must have a Coverage button set using Station User Program codes
46 and group number.
Flexible button 1 = Hunt Coverage Mode On/Off
Flexible button 2 = Delay Ring Cycle
Button 1 = 0 (Off)
Button 2 = 0
0 = Off
1 = On
0 ~ 9 cycles
3.7.2.4 VM Group Attributes
PGM 191
External VM
Flex
Btn
Description Default Values
Wrap-up Timer 1 This parameter sets the duration a station remains unavailable after completing a
call.
002 seconds 000 ~ 999 in 1
second increments
Put Mail Index 2 This parameter defines the index in the Voice Mail dialing table for the Put mail code. 1 1 ~ 4
Get Mail Index 3 This parameter defines the index in the Voice Mail dialing table for the Get mail
code.
2 1 ~ 4
Hunt Type 4 This parameter defines the type of Hunt Group, Circular or Terminal, for the VM
group.
0 (Terminal) 1 = Circular
2 = Terminal
To Next Page
Loading...
