LG-Ericsson ipldk-60 - ISDN System Base Programs (PGM 200 - PGM 202); System ISDN Attributes (PGM 200)

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
141
3.8 ISDN System Base Programs (PGM 200 – PGM 202)
3.8.1 System ISDN Attributes (PGM 200)
PGM 200 defines parameters that affect ISDN CO line operation system-wide.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 200.
3. Select the desired Flexible button.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
PGM
200
Flex
Btn
Description Default Values
Advice of Charge 1 This parameter defines the type of Advice of Charge service provided from the ISDN
based on the country.
0 (No AOC
service)
0 = no AOC service
1 = Italy & Spain
2 = Finland
3 = Australia
4 = Belgium
5 = Standard
6 = Netherlands
CO ATD Code 2 This parameter defines the received DID digits that route the call to the Attendant.
For outgoing DID calls, if PGM 114, Flexible button 5 is set to CO ATD, when a
station places an outgoing ISDN call, this value is used for the CLI.
Not assigned 2 digits, 0 ~ 9
Incoming Prefix
Code Insertion
3 Moved to CO Line Attributes III, PGM 146, Flexible button 1