Issue 2.2
Feature Description and Operation Manual
46
3.12.4 Last Number Redial
Description
The last dialed number on a CO line can be stored (up to 32 digits) in the station's Last Number
Redial buffer. The user may select to redial the last number dialed on the system. Each DKT
with an LCD has 10 individual last dialed number directory locations.
Operation
To use Last Number Redial at a DKT,
1. Lift the handset or press the [On/Off] button.
2. Press the [REDIAL] button
OR
3. Press the [SPEED] button and dial *.
4. Scroll using the Volume Up/Down buttons to find the phone number
5. Press the [HOLD/SAVE] button or [Ok] softkey to accept.
To use Last Number Redial at an SLT,
1. Lift the handset.
2. Dial 5 5 2
Consideration
When the CO line used to place the original call is busy, an idle CO line in the group is
accessed and the last dialed number is dialed.
The last dialed number directory allows duplicate phone numbers.
If Last Number Redial is activated while the ACNR is in use, the ACNR is canceled.
Admin Programming
System Numbering Plan (PGM 106, Flexible button 9)
Assigns the code for an SLT to access LNR
To Next Page
Loading...
