ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
201
PGM
382
Flex
Btn
Description Default Values
First Access RSG
CO
6 When enabled (On), the station accesses the CO line connected to the RSG by
dialing the CO Line access code for the 1
st
available CO group (ex., 9). The RSG is
not supported in ipLDK-60.
1 (On) 0 = Off
1 = On
Ring without CO
Ring Assign
7 When enabled, stations attached to the RSG will ring for incoming calls even if not
assigned CO Ring (PGM 144). The RSG is not supported in ipLDK-60.
1 (On) 0 = Off
1 = On
To Next Page
Loading...
