Issue 2.2
Feature Description and Operation Manual
125
8.2 Meet-Me-Page
Any station may respond to a “Meet Me” Page request over an Internal or External Page Zone.
The user answers the page from any station and is connected to the paging party.
A Flexible button of a DKT may be assigned as a Meet Me Page answer button.
Operation
To respond a Meet-me Page,
1. Lift the handset or press the On/Off button.
2. Dial ‘5 4 4’ (Meet-me Page code)
3. An internal call is established with the paging party and the Page Zone returns to idle.
Consideration
The user must respond to the Meet Me request within the Paging Time-out.
Reference
A. Internal, External Zone and All Call Paging
B. DISA
Admin Programming
System Numbering Plan (PGM 106, Flexible button 4),
Assigns the code for response to Meet Me
Paging Timeout Timer (PGM 181, Flexible button 10)
Sets the time-out for Paging
Page Access (PGM 111, Flexible button 8)
Enables a beep tone prior to page audio
Internal Page Zone (PGM 118)
Assigns stations to Internal Page zones
To Next Page
Loading...
