Issue 2.2
Feature Description and Operation Manual
148
3. Dial the station range that was to be alerted, for a single station, enter ‘＊’ as the
second station.
4. Press the [HOLD/SAVE] button.
To erase the Wake up Fail message from the Attendant Station
1. Call the non-responding Station
Consideration
If a Wake-up alarm is registered at a station, a ‘＊’ is displayed in front of the time of day
in the LCD.
If the system is equipped with a VMIB, the Wake-up greeting is played three times
followed by MOH.
A timed notification is terminated when the Wake-Up Ring Fail timer expires or the
Attendant calls the station.
Reference
A. Attendant Positions
B. VMIB System Greetings
Admin Programming
Wake-up Fail Ring Timer (PGM 182, Flexible buttons 7)
Sets the duration of the notification (0 = Call station, 1 to 98 minutes, or 99 = no
notification)
To Next Page
Loading...