ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
74
PGM
146
Flex
Btn
Description Default Values
* = accept digit
Collect Call
Blocking
7 This parameter defines the type of Collect Call Blocking supported for E1 CO lines
with R2 signaling. (Intended for Brazil only)
O (Disabled)+ 0 = Disable
1 = Double Answer
2 = w/Indicator
Collect Call
Answer Timer
8 010 (1 seconds) 001 ~ 250 in 100
milli-seconds
increments
Collect Call Idle
Timer
9
These parameters determine treatment of an incoming call when Collect Call
Blocking Double Answer is assigned. In this case, the system answers the call and
maintains the connection for the Call Answer time then, the system will disconnect
for the Call Idle time before finally reconnecting the call.
020 (2 seconds) 001 ~ 250 in 100
milli-seconds
increments
To Next Page
Loading...
