ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
94
PGM
167
Flex
Btn
Description Default Values
Tone, an Attendant or a Station Hunt Group. When selecting Hunt Group, enter the
Hunt Group number.
2 = Attendant
3 = Hunt Group (enter
group number)
DND Destination 4 This parameter defines the destination when a DID or DISA call encounters DND
and no forwarding destination is enabled. The destination can be busy Tone, an
Attendant or a Station Hunt Group. When selecting Hunt Group, enter the Hunt
Group number.
1 (Tone) Flexible button
1 = Tone
2 = Attendant
3 = Hunt Group (enter
group number)
VMIB Prompt
Usage
5 Select Flexible
button
Flexible button
1 = Busy Prompt
2 = Error Prompt
3 = DND Prompt
4 = No answer
5 = Attendant Xfer
Busy Prompt 5-1 1 (On) 0 = OFF
1 = ON
Error Prompt 5-2 1 (On) 0 = OFF
1 = ON
DND Prompt 5-3 1 (On) 0 = OFF
1 = ON
No Answer
Prompt
5-4 1 (On) 0 = OFF
1 = ON
Attendant
Transfer Prompt
5-5
The VMIB includes prompts that play when the destination is busy, invalid (error), in
DND, does not answer, or is transferred to an Attendant. Each prompt is separately
enabled. When enabled (On), the VMIB announcement will be presented to the
caller before the call is routed to the assigned destination
1 (On) 0 = OFF
1 = ON
Reroute Busy 6 This parameter defines the destination when a DID or DISA call is rerouted with No- 2 (Attendant) Flexible button
To Next Page
Loading...
